Product Introduction：
To install and use a complete heat exchanger unit, the purchased unit needs to be hoisted to the ground.The entire heat exchanger unit was transported to the machine room using winches, jacks, chain hoists, rollers, etc.When hoisting and placing the entire heat exchanger unit, attention must also be paid to its orientation.After the entire heat exchanger unit is hoisted onto the foundation, four jacks that meet the requirements are needed at the four corners of the entire heat exchanger unit.The entire heat exchange unit was lifted and its planar position was aligned.The heat exchanger unit can only be lowered after its center line aligns with the foundation's center line.After the integrated heat exchanger unit is hoisted into place, leveling is carried out using appropriate methods. Once the integrated heat exchanger unit is leveled and secured, instruments, valves, and auxiliary equipment are installed.
Features：
As for the installation process of pipes and fittings,Pre-installation and embedding, bracket positioning, on-site positioning, bracket installation.Pipeline installation, system pressure testing, painting and insulation, and commissioning.Among these, pre-reserved and pre-embedded holes must be prepared for all pipes that penetrate the wall.To avoid drilling during later construction, sleeves must be pre-embedded where pipes pass through structural walls; drilling later is not permitted to prevent structural damage.When fabricating supports, pipe supports for the same system must be uniform and neat, and the supports must be fabricated and installed according to the drawings. Expansion bolts can be used to fix the supports during installation.
Application Scope：
Project Cases：
Well, the above is the editor's analysis of the precautions for debugging the fully automatic heat exchanger unit.I hope this helps you all.If you have any questions related to heating equipment in the future, you can leave a message to the editor in time.Please send an email to 9988xiaoshuai@gmail.com, we will reply you as soon as we see the email!
9988xiaoshuai@gmail.com
Hot Tags: Skid-mounted heat exchanger unit, China Skid-mounted heat exchanger unit manufacturers, suppliers, factory, complete heat exchanger unit, Efficient Heat Exchange Unit, Fully Automatic Heat Exchanger Unit, Heating Heat Exchanger Unit, Plate Heat Exchanger Unit, Water water Heat Exchanger Unit
