To master the operation skills of the heat exchange station equipment normally and to keep the heat exchange station equipment in a normal operation state for a long time, it is necessary to pay attention to various details, such as the operation specifications of the equipment, maintenance and inspection, emergency handling, etc.
Before starting the heat exchange station equipment, ensure that the equipment is in a normal operating condition, without abnormal sounds, vibrations, or leaks. At the same time, prepare the necessary tools and safety protection equipment. During operation, strictly follow the operating procedures and do not arbitrarily modify or omit the procedures. Especially when operating key equipment such as water pumps and valves, pay special attention to their operating conditions and the displays of the indicating instruments. Operate according to the rated load of the equipment, and it is strictly forbidden to operate beyond the load. If there is a need to adjust the load, it must be approved by the relevant institutions and confirmed that the equipment can normally bear the load.
The maintenance and inspection of heat exchange station equipment should not be overlooked. Regular maintenance and inspection of heat exchange station equipment, including key components such as pipelines, valves, and instruments, should be performed. Potential safety hazards should be discovered and addressed in a timely manner. Keep the equipment clean and dry to prevent equipment failure or safety accidents caused by dust accumulation, water accumulation, etc. For easily corroded equipment parts, anti-corrosion measures such as applying anti-corrosion paint or installing anti-corrosion layers should be taken.
However, by following the operation specifications, the equipment of the heat exchange station can operate normally, but it cannot be guaranteed that emergencies will not occur in the equipment of the heat exchange station, so detailed emergency plans should be formulated and regular drills should be conducted to master the correct methods and skills for accident emergency treatment by the operation and maintenance personnel. When a safety accident occurs, the alarm system should be started immediately and the evacuation and rescue should be carried out according to the emergency plan.